Mini HD

AMIKO MiniHD Software and Firmware
Full HD Digital Satellite Receiver & Media Player

  • ( last update 2016.12.28. )

    Dont forget to make backup on USB pendrive before upgrade your receiver!

    AMIKO MiniHD Galaxy S_1.7.19 by Dekolte : Download-1

    AMIKO MiniHD Galaxy 1.7.20 by Dekolte : Download-1


    AMIKO Mini HD / 0A070A00 black synaps gi_1.7.01 link1 or link2


    Amiko Mini HD 1.7.10 emu

    Download here


    AMIKO_MiniHD_1.7.10. emu

    Amiko Mini HD 1.7.10 mcas

    Download here


    AMIKO_MiniHD_1.7.10. mcas


    • One Conax Embedded card reader
    • 5000 channels (TV and Radio) programmable
    • External IR Sensor (Included in the package)
    • Mountable on TV (Sticker included in the package)
    • Two High Speed USB 2.0 Connections
    • Ethernet Connection & USB WiFi Support (Ralink RT5370 chip only)
    • YouTube videos
    • RSS Reader & Weather Forecast Functions (Ethernet or WiFi connection required)
    • DiSEqC 1.0, 1.1, 1.2 and USALS Compatible
    • Full HD (1080p) Output via HDMI
    • Channel Recording to External Storage Devices
    • Timeshift support
    • Channel Recording & Timeshifting Simulteniously (optional)
    • Channel switching time less than 1 second
    • True-color, User Friendly On-Screen Display (OSD)
    • Full Picture In Graphic (PIG) function
    • Electronic Program Guide (EPG) for on screen channel information
    • Subtitle supported
    • Teletext supported by VBI insertion and software emulation
    • Parental lock facility by channel and program event
    • Program and Channel information transfer from receiver to receiver
    • Exciting games embedded
    • Multi-Language support
    • RTC (Real-Time-Clock)
    • Power Consumption in Stand-By: <0.5W

  • Tuner & Demodulation
    Tuner Type: DVB-S / DVB-S2
    Input Connector: F-type, Connector, Female
    Loop Through: F-type, Connector, Female
    Signal Level: -65 to -25 dBm
    LNB Power & Polarization: Vertical: +13V/+14V,
    Horizontal: +18V/+19V
    Current: Max. 300mA
    Overload Protection
    22KHz Tone Frequency: 22±1KHz
    DiSEqC Control: Version 1.0, 1.1, 1.2, USALS
    Demodulation: QPSK, 8PSK
    Input Symbol Rate: 2-45 Mbps,
    FEC: 1/2, 2/3, 3/4, 5/6, 7/8 and Auto

    System Resources
    Main Processor: 400MHz based CPU
    Flash Memory: 64MBits
    DDR RAM: 1024Mbits


    MPEG TS A/V Decoding
    Transport Stream: MPEG-2, H.264
    Input Rate: Max.120Mbit/s
    Aspect Radio: 4:3, 16:9, Letter Box
    Video Decoding: MPEG-2, MP@ML, MPEG-4 part 10/H264
    Video Resolution: 720*480P/I, 720*576P/I, 1280*720p, 1920*1080i, 1920*1080p
    Audio Decoding: MPEG-1 layer I/II, MPEG-2 layer II, Dolby digital
    Audio Mode: Left / Right / Stereo/ Mono
    Sampling Rate: 32, 44.1 and 48KHz

    Power Supply
    Input Voltage: 12V DC
    Power Consumption: 18W Max
    Stand-By Power Consumption: <0.5W

    A/V & Data Input/Output
    RCA A/V: (Jack Type) Video CVBS output, Audio L/R output
    RS-232C: (Jack Type) Transfer rate 115.2Kbps,
    9 pin D-sub Type
    USB: Two USB 2.0 slots
    HDMI: VER1.3, Type A
    Ethernet: 10/100M RJ45
    IR Port: Jack Type

    Physical Specifications
    Size[W*H*D]: 144mm*40mm*110mm
    Net Weight: 0.5KG
    Operation Temperature: 0°C~+45°C
    Storage Temperature: -10°C~+70°C
    Storage Humidity: 5%~95% RH (Non-Condensing)

  • Upgrade from USB
    Backup as per above instructions.
    Download file (link) and unzip and place the file onthe root of a flashdrive.
    Go to Menu > System > Upgrade by USB > Software (No channel list) > OK
    STB will reboot after loading.
    Firmware update via HTTP
    Amiko MiniHD Online Update Instructions
    Amiko MiniHD has enabled the HTTP online update function.This allows your STB to download and install new
    firmware with a few button pushes.
    Before doing any update you should make a backup of your current firmware, channels
    and settings.

    1. Plug in a USB flash drive to the STB.
    2. Go to MENU > SYSTEM > BACKUP TO USB and press OK.
    3. Arrow down to “Backup to USB” and press OK. This makes a backup copy of your
    channel list and settings.

    Online update instructions

    HTTP adress from our site :

    (for Amiko MiniHD 1.6.57 version)

    1. Be sure you have an active internet connection to your STB.
    3. Upgrade mode will normally be “Software (no Channel list)” If a different mode
    needs to be used special instructions will be posted.
    4. Press the RED key on your remote control. The STB will connect to our server and
    start downloading the current firmware. Once complete the firmware will update
    and your STB will reboot. If using the “Software (no Channel list)” upgrade type all
    of your settings, satellites and channels will remain intact.
    How to determine if there is new firmware available
    When you press the RED key to update you will see the below screen. The second
    number under old version and new version is the firmware version. The last 4 numbers
    are the actual version. In this example you see 1478 which is firmware 1.4.78. Since the
    old and new read 1478 your firmware is current. You can press the MENU or EXIT key to
    abort anytime during the download portion.






Leave a Reply