| Last update 2017.03.16. AMIKO MiniHD Combo 1.6.07 emu download AMIKO MiniHD Combo 1.6.07 mcas download |
- DVB-S2 Satellite & DVB-T2/C Terrestrial / Combo Receiver
- One Conax Embedded card reader
- 5000 channels (TV and Radio) programmable
- External IR Sensor (Included in the package)
- Mountable on TV (Sticker included in the package)
- One High Speed USB 2.0 Connection
- Ethernet Connection & USB WiFi Support (Ralink RT5370 chip only)
- YouTube videos
- RSS Reader & Weather Forecast Functions (Ethernet or WiFi connection required)
- DiSEqC 1.0, 1.1, 1.2 and USALS Compatible
- Full HD (1080p) Output via HDMI
- Channel Recording to External Storage Devices (from one frequency only)
- Timeshift support
- Channel Recording & Timeshifting Simulteniously (optional, only from same frequency)
- Channel switching time less than 1 second
- True-color, User Friendly On-Screen Display (OSD)
- Full Picture In Graphic (PIG) function
- Electronic Program Guide (EPG) for on screen channel information
- Subtitle supported
- Teletext supported by VBI insertion and software emulation
- Parental lock facility by channel and program event
- Program and Channel information transfer from receiver to receiver
- Multi-Language support
- RTC (Real-Time-Clock)
- Power Consumption in Stand-By: <0.5W
Technical Specifications
Tuner & Demodulation
Tuner Type: DVB-S / DVB-S2
Input Connector: F-type, Connector, Female
Loop Through: F-type, Connector, Female
Signal Level: -65 to -25 dBm
LNB Power & Polarization: Vertical: +13V/+14V,
Horizontal: +18V/+19V
Current: Max. 300mA
Overload Protection
22KHz Tone Frequency: 22±1KHz
DiSEqC Control: Version 1.0, 1.1, 1.2, USALS
Demodulation: QPSK, 8PSK
Input Symbol Rate: 2-45 Mbps,
FEC: 1/2, 2/3, 3/4, 5/6, 7/8 and Auto
Tuner Type: DVB-T2 / DVB-C
Frequency Range: 48~862MHz
RF Input Level: -80dBm to -20dBm
Antenna power output: DC 5V at max 75mA, Overload protection
Demodulation: COFDM 1K, 2K, 4K, 8K normal and extended, 16K normal and extended, 32K normal and extended
Input Symbol Rate: 1.0 ~ 7.0Ms/s
Constellations: QPSK, 16QAM, 64QAM, 256QAM / Both rotated and non-rotated
Guard Intervals: 1/4, 19/256, 1/8, 19/128, 1/16, 1/32, 1/128
Code Rate: 1/2, 3/5, 2/3, 3/4, 5/6
System Resources
Main Processor: 400MHz based CPU
Flash Memory: 64MBits
DDR RAM: 1024Mbits
——————————
MPEG TS A/V Decoding
Transport Stream: MPEG-2, H.264
Input Rate: Max.120Mbit/s
Aspect Radio: 4:3, 16:9, Letter Box
Video Decoding: MPEG-2, MP@ML, MPEG-4 part 10/H264
Video Resolution: 720*480P/I, 720*576P/I, 1280*720p, 1920*1080i, 1920*1080p
Audio Decoding: MPEG-1 layer I/II, MPEG-2 layer II, Dolby digital
Audio Mode: Left / Right / Stereo/ Mono
Sampling Rate: 32, 44.1 and 48KHz
Power Supply
Input Voltage: 12V DC
Power Consumption: 18W Max
Stand-By Power Consumption: <0.5W
A/V & Data Input/Output
RCA A/V: (Jack Type) Video CVBS output, Audio L/R output
RS-232C: (Jack Type) Transfer rate 115.2Kbps, 9 pin D-sub Type
USB: One USB 2.0 slot
HDMI: VER1.3, Type A
Ethernet: 10M RJ45
IR Port: Jack Type
S/PDIF: Optical for Digital Audio or Dolby Digital output
Physical Specifications
Size[W*H*D]: 144mm*40mm*110mm
Net Weight: 0.5KG
Operation Temperature: 0°C~+45°C
Storage Temperature: -10°C~+70°C
Storage Humidity: 5%~95% RH (Non-Condensing)
How to
Upgrade from USB
Backup as per above instructions.
Download file (link) and unzip and place the file onthe root of a flashdrive.
Go to Menu > System > Upgrade by USB > Software (No channel list) > OK
STB will reboot after loading.
*****************
Firmware update via HTTP
Amiko MiniHD Combo Online Update Instructions
Amiko MiniHD Combo has enabled the HTTP online update function.This allows your STB to download and install new
firmware with a few button pushes.
Before doing any update you should make a backup of your current firmware, channels
and settings.
1. Plug in a USB flash drive to the STB.
2. Go to MENU > SYSTEM > BACKUP TO USB and press OK.
3. Arrow down to “Backup to USB” and press OK. This makes a backup copy of your
channel list and settings.
Online update instructions
HTTP adress from our site :
http://amikoreceiver.com/mhdc1352.abs
(for Amiko MiniHD Combo 1.3.52 version)
1. Be sure you have an active internet connection to your STB.
2. Go to MENU > INTERNET > HTTP UPGRADE > MANUAL UPGRADE
3. Upgrade mode will normally be “Software (no Channel list)” If a different mode
needs to be used special instructions will be posted.
4. Press the RED key on your remote control. The STB will connect to our server and
start downloading the current firmware. Once complete the firmware will update
and your STB will reboot. If using the “Software (no Channel list)” upgrade type all
of your settings, satellites and channels will remain intact.
How to determine if there is new firmware available
When you press the RED key to update you will see the below screen. The second
number under old version and new version is the firmware version. The last 4 numbers
are the actual version. In this example you see 1478 which is firmware 1.4.78. Since the
old and new read 1478 your firmware is current. You can press the MENU or EXIT key to
abort anytime during the download portion.